Model No.: YM-0011
Shaping Mode: Injection Mould
Surface Finish Process: Polishing
Mould Cavity: Single Cavity
Process Combination Type: Progressive Die
Runner: Hot Runner
Design Software: UG
Packaging: Wooden Cases
Productivity: Based on customer requirements
Place of Origin: China
Supply Ability: 500+
Plastic Injection Molding BMC Mould production
The Plastic Injection Molding Process
The plastic that is used in plastic injection molding is in pellet form. A mixture of different types of plastic can be used and other ingredients, such as colorants can also be added. The specific type of plastic used will depend on the qualities that the finished product requires. The plastic moves from a hopper to a heated barrel, where it melts. This melted plastic then is pushed into a Mold through a nozzle by a plunger, in much the same way that liquids move through a hypodermic needle.
Although the chamber is heated, the mold is kept at a cooler temperature. This cooler temperature causes the plastic to cool and harden. Once that has happened it can be removed from the mold and any finishing touches such as smoothing out ridges or removing excess material can be completed.
Plastic Injection Molding, BMC Molding, Phenolic Molding, Automotive Molding, Speaker Fret Molding
1.Mold Design and Engineering
2.Mold Flow analysis
3.Plastic mold manufacture
4.Mold injectionthe process has been refined to make it more efficient and to enable manufacturers to use different types of plastics that have different qualities.
When plastic is melted it can be molded into a variety of different shapes as it is extremely malleable.
Manufacturers needed to find a way that melted plastic could be forced into
Product Categories : BMC & Phenolic Parts